WallStackableBin

WallMounted › WallStackableBin

A wall-mounted bin that can stack or hang from a wall.

Features:

Configurable dimensions (width, height, depth)
Adjustable front slope angle for easy access
Optional label area on front face
Stackable design with interlocking geometry
Multiple wall mounting options

Stacking Compatibility:

The stacking mechanism requires careful consideration of wall mounting types. Bins using "plain" wall mounts can stack on bins with other mount types. Note: Using the "outside" dimension option is generally not compatible with stacking.

Assembly Notes:

The generator produces three pieces with angled finger joints. Bottom panel, sloped front panel and label panel (if enabled).
Joint lengths vary to accommodate the slope angles
Orient pieces as shown in the generated layout to assemble correctly.

Settings for Finger Joints

style

style of the fingers

surroundingspaces

space at the start and end in multiple of normal spaces

bottom_lip

height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

extra_length

extra material to grind away burn marks (multiples of thickness)

finger

width of the fingers (multiples of thickness)

play

extra space to allow finger move in and out (multiples of thickness)

space

space between fingers (multiples of thickness)

width

width of finger holes (multiples of thickness)

Settings for plain WallEdges

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

Settings for SlatWallEdges

bottom_hook

"spring", "stud" or "none"

hook_depth

horizontal width of the hook

hook_distance

horizontal space to the hook

hook_height

height of the horizontal bar of the hook

hook_overall_height

height of the hook top to bottom

pitch

vertical spacing of slots middle to middle (in mm)

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

hook_extra_height

space surrounding connectors (multiples of thickness)

Settings for DinRailEdges

bottom

"stud" or "none"

depth

horizontal width of the hook

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

Settings for FrenchCleatEdges

angle

angle of the cut (0 for horizontal)

bottom

"stud" to brace against the wall, "hook" for attaching to a second cleat or "none" for just straight

depth

horizontal width of the hook in mm

spacing

distance of the cleats in mm (for bottom hook)

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

Settings for SkadisEdges

board_thickness

Thickness of the Skandis board

style

How to hook into the wall

edge_width

Settings for Stackable Edges

angle

inside angle of the feet

bottom_stabilizers

height of strips to be glued to the inside of bottom edges (multiples of thickness)

height

height of the feet (multiples of thickness)

holedistance

distance from finger holes to bottom edge (multiples of thickness)

width

width of the feet (multiples of thickness)

WallStackableBin Settings

walltype

Type of wall system to attach to

outside

treat sizes as outside measurements 🛈

sections left to right in mm 🛈

inner height in mm

inner depth in mm

front

fraction of bin height covered with slope

angle

angle of the bottom slope

label

include a label area on the front

label_height

fraction of bin height covered with label (if label is enabled)

Default Settings

thickness

Thickness of the material [mm]

burn

Burn correction [mm] (bigger values for tighter fit)

format

Format of the resulting file

labels

Label the parts (where available)

reference

Print reference rectangle with given length [mm] (0 to disable)

tabs

Width of tabs holding parts in place [mm]

qr_code

Add a QR Code with link or command line to the generated output

inner_corners

Style for inner corners

spacing

Spacing around parts (multiples of thickness [: extra space in mm])

debug

Print surrounding boxes for some structures