Simple wall with options for different edges
diameter of the pin hole in mm
pieces per hinge
number of hinges per edge
style of hinge used
radius of the eye (multiples of thickness)
space between eyes (multiples of thickness)
minimum space around the hinge (multiples of thickness)
angle of the hooks bending outward
radius at the bottom (multiples of thickness)
length of the hooks (multiples of thickness)
how much should fingers widen (-80 to 80)
how far the dove tails stick out of/into the edge (multiples of thickness)
radius used on all four corners (multiples of thickness)
from one middle of a dove tail to another (multiples of thickness)
style of the fingers
space at the start and end in multiple of normal spaces
height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
space below holes of FingerHoleEdge (multiples of thickness)
extra material to grind away burn marks (multiples of thickness)
width of the fingers (multiples of thickness)
extra space to allow finger move in and out (multiples of thickness)
space between fingers (multiples of thickness)
width of finger holes (multiples of thickness)
pressure angle
clearance
modulus of the gear (in mm)
Profile shift
extend outward the straight edge
"wave" or "bumps"
depth of the grooves
have lid overlap at the sides (similar to OutSetEdge)
set to lower value to get disks surrounding the pins
diameter of the pin hole (multiples of thickness)
fixed length of the grips on he lids (multiples of thickness)
thickness of the arc holding the pin in place (multiples of thickness)
whether to include finger joints on the edge with the box
whether to include finger joints on the edge with the lid
radius of the disc rotating in the hinge (multiples of thickness)
width of the "finger hole" in mm
additional pin for better positioning
position(s) of the extra locking springs in the lid
inside angle of the feet
height of strips to be glued to the inside of bottom edges (multiples of thickness)
height of the feet (multiples of thickness)
distance from finger holes to bottom edge (multiples of thickness)
width of the feet (multiples of thickness)
inner width in mm
inner height in mm
radius to strengthen the corners
edge type for bottom edge
edge type for right edge
edge type for left edge
Thickness of the material [mm]
Burn correction [mm] (bigger values for tighter fit)
Format of the resulting file
Label the parts (where available)
Print reference rectangle with given length [mm] (0 to disable)
Width of tabs holding parts in place [mm]
Add a QR Code with link or command line to the generated output
Style for inner corners
Spacing around parts (multiples of thickness [: extra space in mm])
Print surrounding boxes for some structures
Boxes.py
Boxes.py
